Perler Bead Tic Tac Toe Game

Learn how to make perler bead tic tac toe using simple supplies! Kids will love this easy project with beads that results in a game to play.

Skills Required: None. Even if you’ve never crafted before, this game is easy to make. You’ll be melting beads with an iron and gluing them together. The patterns are at the bottom of the post.

tic tac toe perler beads

I come from a house of gamers – but I’m talking O.G. gamers, baby. Board games.

My four brothers and I didn’t have a ton of toys when we were young, and the toys we did have were all communal.

What we did have a lot of was books, blocks, and board games. Our uncle made the blocks, and board games (and books for that matter) were relatively cheap back then.

So it was a lot of entertainment with a low price per minute – for five kids especially!

In addition to board games we’d play cards, chess (which I guess is still a board game) and a lot of tic tac toe.

The concept of tic tac toe is simple and you probably already know it. There’s a grid of nine squares, and the goal is to cover the grid horizontally, vertically, or diagonally with a row of three.

And the great thing about that particular game for my family is that the concept was so simple, everyone could play it! I’m ten years older than my youngest brother, so for everyone to be able to play a game, it had to be simple.

And tic tac toe is very simple. In more ways than one. Not only is it simple to play, but it’s simple to make! And today I’m sharing a perler bead tic tac toe game!

This is a super easy summer craft or boredom buster that kids are going to love. Not that you can’t make them any time of year.

Tray of a variety of colors of hama beads

Perler beads are recommended for ages six and up, so this is a very fun craft to try with your elementary age kids. All children seem to love perler beads (also known as hama beads, fuse beads, or melty beads). But don’t be shy – adults love them too!

Tips for Using Perler Beads

Before we get into the game creation, I want to review a few basics of using fuse beads to make sure you get the best results. If you don’t want the tips, scroll down to the bottom to get the patterns and tutorial.

Remember that the overall goal is to melt the beads together on both sides while still leaving the holes open. Here’s how you get the best results (with a rainbow as an example).

Use Ironing or Parchment Paper

Place ironing paper or parchment paper over the beads on the pegboard. Be gentle so you don’t disturb the beads underneath.

Ironing paper laid over the beads

Heat your iron to the medium setting (no steam). In a circular motion, begin to iron the project. Don’t press down too hard with the iron. When ironed properly, the beads will still have an open center. Check and make sure your edges are melted. Let the design cool on the pegboard.

Ironing the beads with a mini iron

Note: BE CAREFUL about lifting up the paper while you’re ironing! If you want to check, carefully peel back paper around the edge of your design and see if all the beads are melted.

If you lift the paper up quickly and there are a lot of unmelted beads, they will easily fall off or go flying and you may be forced to start over. Sometimes the edges need more time so when you check, just check the edges and peel paper back slowly.

Peeling back the paper to check if the beads are melted

Another Note: some beads melt faster than others (clear melts faster than white, for example). So some holes might be larger than others. It’s okay! That’s part of the look of the project.

Iron the Other Side

Remove the bead design from the pegboard. Flip it over to the non-melted side and repeat the fusing process.

Ironing the other side of a fuse bead design

Remove the Paper

Let cool completely and remove the paper again (which is reusable). Some people pull the paper off after they iron the first side, but I just wait until the end and peel off both pieces. It’s up to you!

Peeling the ironing paper off the finished project

There’s only one additional step you’re going to need to do to make the perler bead tic tac toe game, and that’s glue the grid down on top of the base.

layered perler bead pieces for tic tac toe

I used a dab of clear drying craft adhesive (Aleene’s works great) to attach the finished designs to the sticks. They dried completely in about an hour. You could probably hot glue them as well.

adding glue to the tic tac toe grid

I let the glue dry a little bit, then I sat a big pot on top so that the game would dry flat. That’s really all you need to know to get this made!

Gluing the board together

Tic Tac Toe Perler Beads

Now if you’re ready to make the game, here are the patterns! You’ll need to make the base, the grid, and then the pieces.

Tic Tac Toe Base

This fills an entire 29 x 29 square and uses 841 beads in the color of your choice.

orange tic tac toe base hama beads

Tic Tac Toe Grid

This pattern uses 400 beads in the color of your choice.

green tic tac toe grid perler pattern

Tic Tac Toe Pieces

You’ll need five of each piece. I chose flowers for my game, but you can make any shape you like! If you choose my shapes, you’ll need 260 beads (you can use white or clear beads with the pink flowers).

tic tac toe pieces perler beads

If you try this perler bead tic tac toe, let me know in the comments! I’d also love for you to check out these additional ideas:

The post Perler Bead Tic Tac Toe Game appeared first on DIY Candy.